What should be paid attention to when starting the rock loader?

What should be paid attention to when starting the rock loader?

As the saying goes, details determine success or failure. In order to succeed, in addition to controlling the overall situation, you must also pay attention to some details. Otherwise, it is very likely to fail because of these small presences. Therefore, the same is true for the starting and driving of the loader. Sometimes, a small detail operation error will lead to startup failure, and even cause a certain degree of damage to the machine. So the following editor will talk about the details in this regard.

1. Check to make sure the loader is in good condition. Open the latch and send a start signal. Evacuate personnel to a safe place. Open an empty car for a test run, and run an inspection without a load. Each control button, whether the operating mechanism is flexible and reliable. Whether the lighting is good. The wire rope fits tightly. Walk normally. The wearing condition meets the requirements. The sound of each part is normal, and there is no strong vibration. The braking device of the scraper should be complete and reliable.

2. It runs normally after the test run. The driver stands on the side of the operating handle and presses the main and auxiliary rope handles with both hands to make the rock loader move forward. Adjust the machine distance according to the requirements of the operating regulations.

3. Tighten the guide rail clamps and bolts, and the rock loader is fixed firmly.

Therefore, when you start driving the loader, you must pay more attention to the three places mentioned above by the editor, so as to avoid mistakes when starting to drive the machine. At the same time, the editor also reminds everyone that before starting to drive, you must do a detailed inspection in multiple directions to ensure that there is no problem with the machine before you can start driving.